PolyTerra™ PLA+ filament contains organic material than ordinary PLA which brings better layer adhesion and extra toughness.
RECOMMENDED PRINTING CONDITIONS
* Based on 0.4 mm nozzle and Simplify 3D v.4.0. Printing conditions may vary with different nozzle diameters
Parameter | |
Nozzle temperature | 190 – 220 (℃) |
Build surface material | BuildTak® , Glass, Blue Tape |
Build surface treatment | Glue, Magigoo |
Build plate temperature | 30 - 60 (˚C) |
Cooling fan | ON |
Printing speed | 30 - 70 (mm/s) |
Raft separation distance | 0.2 (mm) |
Retraction distance | 1 - 3 (mm) |
Retraction speed | 30 - 60 (mm/s) |
Environmental temperature | Room temperature – 45 (˚C) |
Threshold overhang angle | 60 (˚) |
Recommended support material | Self-support |
Testing Method | Typical Value | |
Density | ISO1183, GB/T1033 | 1.24 g/cm3 at 21.5°C |
Melt index | 210°C, 2.16kg | 8 g/10min |
Property | Testing Method | Typical Value |
Young’s modulus (X-Y) | ISO 527, GB/T 1040 | 2245.9 ± 90.7 MPa |
Young’s modulus (Z) | 1781.2 ± 53.2 MPa | |
Tensile strength (X-Y) |
- Stock: In Stock
- Model: FL_PM_PTPLA_SB