PolyLite™
PC is produced using a polycarbonate resin specifically engineered for 3D
printing. It delivers good stiffness and heat resistance with light diffusing
properties. RECOMMENDED PRINTING CONDITIONS * Based on 0.4 mm nozzle and Simplify 3D v.4.0. Prin..
PolyTerra™ PLA+ filament contains organic material
than ordinary PLA which brings better layer adhesion and extra toughness.
* Based on 0.4 mm nozzle and Simplify 3D v.4.0.
Printing conditions may vary with different nozzle diametersRECOMMENDED PRINTING PARAMETERS
Parameter
..
PolyTerra™ PLA+ filament contains organic material than ordinary PLA which brings better layer adhesion and extra toughness. RECOMMENDED PRINTING CONDITIONS ..
PolyTerra™ PLA+ filament contains organic material
than ordinary PLA which brings better layer adhesion and extra toughness.
* Based on 0.4 mm nozzle and Simplify 3D v.4.0.
Printing conditions may vary with different nozzle diametersRECOMMENDED PRINTING PARAMETERS
Parameter
..
PolyFlex™️ TPU90, created from
Covestro’s Addigy®️ family, is a thermoplastic polyurethane (TPU) based
filament designed to provide great flexibility without compromising on printing
speed. It also has the ability to resist ultra-violet (UV) light or sunlight.
..
PolyLite™ PLA is a high-quality PLA
designed for reliability and ease of printing.
Property
Testing Method
Typical Value
Density
ISO1183,
GB/T1033
1.17
g/cm3 at 23°C
Melt index
..
PolyLite™ PLA is a high-quality PLA
designed for reliability and ease of printing.
Property
Testing Method
Typical Value
Density
ISO1183,
GB/T1033
1.17
g/cm3 at 23°C
Melt index
210..
PolyLite™ PLA is a high-quality PLA
designed for reliability and ease of printing. * Based on 0.4 mm nozzle Printing conditions may vary with different nozzle diametersParameter Nozzle temperature190 – 230 (℃)Build surface materialBuildTak® , Glass, Blue TapeBuild surface treatmentGlue, M..
PolyLite™ PLA is a high-quality PLA
designed for reliability and ease of printing.
Property
Testing Method
Typical Value
Density
ISO1183,
GB/T1033
1.17
g/cm3 at 23°C
Melt index
210..
PolyLite™ PLA is a high-quality PLA
designed for reliability and ease of printing.
Property
Testing Method
Typical Value
Density
ISO1183,
GB/T1033
1.17
g/cm3 at 23°C
Melt index
210..