Product feature:
·
Works
right out of the box, set up in 15 minutes
· Well-polished hardware and software
· Enclosed-body for high-temperature filament printing
· Up to 16-color printing with AMS
· Up to 20000 mm/s² acceleration, prints a benchy in 18min
· Build-in camera for remote monitoring and timelapsebu Lab P1S 3D Printer
Specifications:
Item |
Specification |
|
Printing Technology |
Fused Deposition Modeling |
|
Body |
Build Volume (WDH) |
256 X 256 X 256 mm³ |
Chassis |
Steel |
|
Shell |
Plastic & Glass |
|
Toolhead |
Hot End |
All-Metal |
Extruder Gears |
Steel |
|
Nozzle |
Stainless Steel |
|
Max Hot End Temperature |
300°C |
|
Nozzle Diameter (Included) |
0.4 mm |
|
Nozzle Diameter (Optional) |
0.2 mm, 0.6 mm, 0.8 mm |
|
Filament Cutter |
Yes |
|
Filament Diameter |
1.75 mm |
|
Heatbed |
Build Plate (Included) |
Bambu Dual-Sided Textured PEI Plate |
Build Plate (Optional) |
Bambu Cool Plate, Bambu Engineering
Plate, Bambu High Temperature Plate |
|
Max Build Plate Temperature |
100°C |
|
Speed |
Max Speed of Toolhead |
500 mm/s |
Max Acceleration of Toolhead |
20 m/s2 |
|
Max Hot End Flow |
mm3/s @ABS(Model 150*150mm single
wall; Material: Bambu ABS: Temperature: 280°C) |
|
Cooling&Filtration |
Part Cooling Fan |
Closed Loop Control |
Hot End Fan |
Closed Loop Control |
|
Control Board Fan |
Closed Loop Control |
|
Chamber Temperature Regulator Fan |
Closed Loop Control |
|
Auxiliary Part Cooling Fan |
Closed Loop Control |
|
Air Filter |
Activated Carbon Filter |
|
|
PLA, PETG, TPU, ABS, ASA, PVA, PET |
Ideal |
Supported Filament |
PA, PC |
Capable |
|
Carbon/Glass Fiber Reinforced Polymer |
Not Recommended |
Sensors |
Chamber Monitoring Camera |
Low-Rate Camera 1280 x 720/0.5fps
Timelapse Supported |
Filament Run Out Sensor |
Yes |
|
Filament Odometry |
Optional with AMS |
|
Power Loss Recover |
Yes |
|
Physical Dimensions |
Dimensions (WxDxH) |
389*389*458 mm³ |
Net Weight |
12.95 kg |
|
Electrical Parameters |
Input Voltage |
100-240 VAC, 50/60 Hz |
Max Power |
1000 W@220 V, 350W@110V |