PolyTerra™ PLA+ filament contains organic material than
ordinary PLA which brings better layer adhesion and extra toughness.
RECOMMENDED PRINTING CONDITIONS
* Based on 0.4 mm nozzle
and Simplify 3D v.4.0. Printing
conditions may vary with different nozzle diameters
Parameter
|
|
Nozzle
temperature |
190 –
220 (℃)
|
Build surface material |
BuildTak® , Glass, Blue Tape |
Build
surface treatment |
Glue,
Magigoo |
Build plate temperature |
30 - 60 (˚C) |
Cooling fan |
ON |
Printing speed |
30 - 70 (mm/s) |
Raft
separation distance |
0.2 (mm) |
Retraction distance |
1 - 3 (mm) |
Retraction
speed |
30
- 60 (mm/s) |
Environmental temperature |
Room temperature – 45 (˚C) |
Threshold
overhang angle |
60 (˚) |
Recommended support material |
Self-support |
|
Testing
Method |
Typical
Value |
Density |
ISO1183,
GB/T1033 |
1.24
g/cm3 at 21.5°C |
Melt index |
210°C, 2.16kg |
8 g/10min |
Property
|
Testing
Method |
Typical Value |
Young’s modulus (X-Y) |
ISO 527,
GB/T 1040 |
2245.9
± 90.7 MPa |
Young’s
modulus (Z) |
1781.2 ± 53.2 MPa |
|
Tensile
strength (X-Y) |
₹1,300
We use cookies and other similar technologies to improve your browsing experience and the functionality of our site. Privacy Policy.
|