PolyLite™
PC is produced using a polycarbonate resin specifically engineered for 3D
printing. It delivers good stiffness and heat resistance with light diffusing
properties.
RECOMMENDED PRINTING CONDITIONS
*Based on 0.4 mm nozzle and Simplify 3D v.4.0. Printing conditions may vary with different nozzle diameters
Parameter
Nozzle temperature
250 – 270 (℃)
Build surface material
BuildTak® , Glass, PEI
Build surface treatment
Magigoo
Build plate temperature
90 - 105 (˚C)
Cooling fan
OFF
Printing speed
30-50 (mm/s)
Raft separation distance
0.2 (mm)
Retraction distance
1 (mm)
Retraction speed
20 (mm/s)
Environmental temperature
70-80 (˚C)（Recommended）
Threshold overhang angle
50 (˚)
Recommended support material
PolyDissolve™ S2
PHYSICAL PROPERTIES
Property
Testing Method
Typical Value
Density
ISO1183,
GB/T1033
1.19
g/cm3at 23°C
Melt index
260°C,
2.16kg
8-11
g/10min
MECHANICAL PROPERTIES
Property
Testing Method
Typical Value
Young’s modulus (X-Y)
ISO 527, GB/T 1040
2497
± 154 MPa
Young’s modulus (Z)
2371
± 55 MPa
Tensile strength (X-Y)
ISO 527, GB/T 1040
69.1
± 3.0 MPa
Tensile strength (Z)
52.8
± 1.7 MPa
Elongation at break (X-Y)
ISO 527, GB/T 1040
4.8
± 0.9 %
Elongation at break (Z)
2.7
± 0.1 %
Bending modulus (X-Y)
ISO 178, GB/T 9341
2640
± 47 MPa
Bending modulus (Z)
N/A
Bending strength (X-Y)
ISO 178, GB/T 9341
106.1
± 1.6 MPa
Bending strength (Z)
N/A
Charpy impact strength (X-Y)
ISO 179,
GB/T 1043
4.1
± 0.9 kJ/m2
Charpy impact strength (Z)
N/A
*Specimens printed on Raise 3D E2 with 0.4mm
nozzle.
